R07.05.01.01 · 任务小类

二维CAD绘图与修订

2D CAD drafting & revision

Reproduce or revise dimensioned drawings with layers, blocks and annotation standards.

20 条本项目编写的提案 · 分类 v1.1 · 新增基准运行 0 次。下方验证方式与部分得分规则是设计，不是执行结果。

典型应用: AutoCAD · BricsCAD · LibreCAD
小类 GUI 需求标签: G3 · 仅 GUI

任务提案 · 20

展开查看完整原文与建议检查方式；两种界面均保留提案英文原文。

R07.05.01.01-T01 Redraw a dimensioned apartment floor plan from PDF in AutoCAD model space

原始指令

Reproduce input/apt_L3_plan.pdf (1:100, metric) in AutoCAD 2025 starting from template fixtures/office_A.dwt. Draw walls, openings, doors (swing arcs) and windows at true size in mm on layers A-WALL, A-DOOR, A-GLAZ, A-DIMS, with the 42 dimensions shown in the PDF as associative linear dimensions. Save as out/apt_L3.dwg.

平台: win · Windows mac · macOS
应用: AutoCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: geom · 精确几何 click · 指向与点击 type · 文字与表单
工作产物: WP04 · 三维 / 空间模型
条件: licensed · 授权专业软件 long · 长流程
提案难度: 5 / 5

建议验证方式

DWG→DXF via ODA converter, parsed with ezdxf: wall centerline/face geometry vs reference Hausdorff ≤5 mm after origin alignment; 42 dims present, measured values equal reference (±1 mm) and associative; entities on correct layers. AutoLISP, SCRIPT, ACCORECONSOLE and .NET loading disabled; command log must show interactive commands.

建议部分得分

40% wall/opening geometry; 20% doors & windows; 30% dimensions (scaled); 10% layering

R07.05.01.01-T02 Apply a five-item revision to a plan: grid move, dims, hatch layer, rev table

原始指令

Open fixtures/office_L2.dwg in AutoCAD. Per input/rev_C_markup.pdf: move grid line C and its attached walls 600 mm east, ensure associative dimensions update, move all slab hatch to layer A-FLOR-PATT, add revision clouds around the 3 changed areas on layer A-ANNO-REVS, and add row C (date 2026-10-14, 'Grid C relocated') to the revision table block in Layout A101. Save.

平台: win · Windows mac · macOS
应用: AutoCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: geom · 精确几何 click · 指向与点击 type · 文字与表单
工作产物: WP04 · 三维 / 空间模型
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

ezdxf on converted DXF: grid C line and 8 attached wall segments shifted +600 mm X (±0.5 mm), others unchanged; dims touching them updated values; all slab hatches on A-FLOR-PATT; ≥3 REVCLOUD polylines enclosing change regions; title-block attribute row C values exact. Scripting disabled; command log checked.

建议部分得分

35% grid & walls moved; 20% dims updated; 15% hatch layer; 30% clouds & rev table row

R07.05.01.01-T03 Set up an A1 layout with a locked 1:50 viewport and plot to PDF

原始指令

In fixtures/clinic_ground.dwg create layout A-102 using the A1 title block block TB_A1 (insert at 0,0), a single viewport framing the Treatment Wing (named view TREAT) at exactly 1:50, locked, on layer G-VPRT set to no-plot. Plot to out/A-102.pdf with monochrome.ctb, A1 landscape, 1:1.

平台: win · Windows mac · macOS
应用: AutoCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 geom · 精确几何 nav · 平移 / 缩放 / 滚动
工作产物: WP03 · 视觉排版
条件: licensed · 授权专业软件
提案难度: 2 / 5

建议验证方式

DXF: layout A-102 with TB_A1 at origin; one viewport with scale 1/50 (custom scale 0.02), display locked, center within the TREAT view extents; viewport layer no-plot; PDF 841×594 mm page, raster vs reference SSIM ≥0.9. AutoLISP and .scr scripts disabled (plus ActiveX/.NET on Windows); the DWG must be saved by AutoCAD, with its command log checked.

建议部分得分

25% layout & title block; 35% viewport scale/extent; 15% lock & layer; 25% PDF output

R07.05.01.01-T04 Convert 24 exploded desks into one attributed block and replace all copies

原始指令

fixtures/open_office.dwg contains 24 desk workstations drawn as loose lines/arcs. Create block DESK_1600 (insertion point at desk front-left corner) with attributes DESK_ID and DEPT, replace every loose desk with a block reference at the same position/rotation, and fill DESK_ID D01-D24 per input/desk_list.xlsx. Purge leftover geometry.

平台: win · Windows mac · macOS
应用: AutoCAD · Excel
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: geom · 精确几何 click · 指向与点击 multi · 跨应用
工作产物: WP04 · 三维 / 空间模型
条件: licensed · 授权专业软件 multiapp · 多应用
提案难度: 3 / 5

建议验证方式

DXF: block DESK_1600 with 2 attribute definitions; exactly 24 INSERTs at fixture desk positions (±1 mm) and rotations (±0.1°); no remaining desk loose entities (geometry diff); attribute values match xlsx. Scripting disabled.

建议部分得分

25% block definition; 40% 24 instances placed; 20% attributes; 15% loose geometry removed

R07.05.01.01-T05 Create an annotative 1:50 dimension style and restyle all dimensions

原始指令

In fixtures/school_section.dwg create dimension style DIM_A (ISO-25 based, annotative, 2.5 mm paper text height, architectural tick 1.5 mm, extension offset 1 mm, unit precision 0 mm, text style ARIAL_N). Apply it to all 63 dimensions and make them display at 1:50 in the A201 viewport. Remove style overrides.

平台: win · Windows mac · macOS
应用: AutoCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 type · 文字与表单
工作产物: WP04 · 三维 / 空间模型
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

DXF DIMSTYLE DIM_A with stated DIMTXT/DIMASZ/DIMEXO/DIMDEC/annotative flag; all 63 DIMENSION entities use DIM_A with no XDATA overrides and include 1:50 annotation scale; plotted check of viewport text height 2.5±0.1 mm. AutoLISP and .scr scripts disabled (plus ActiveX/.NET on Windows); the DWG must be saved by AutoCAD, and its command log is checked for DIMSTYLE use.

建议部分得分

40% style variables; 35% applied to all dims; 25% annotation scale 1:50

R07.05.01.01-T06 Draft a flange gasket drawing with PCD holes and dimensions in LibreCAD

原始指令

In LibreCAD 2.2 draw gasket DN100 per input/gasket_sketch.jpg: OD 220, ID 115, 8 holes Ø18 on PCD 180 starting at 22.5°, on layers OUTLINE, CENTER (dash-dot) and DIMS. Dimension OD, ID, PCD and one hole with a radial/diameter dimension and note '8x Ø18 EQ SP'. Save out/gasket_dn100.dxf.

平台: mac · macOS win · Windows lin · Linux
应用: LibreCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: geom · 精确几何 click · 指向与点击 type · 文字与表单
工作产物: WP04 · 三维 / 空间模型
条件: 未声明
提案难度: 3 / 5

建议验证方式

ezdxf: circles OD/ID/8 holes with exact radii (±0.01) and hole centers on PCD at 22.5+45k° (±0.01); centerline layer linetype dashdot; ≥4 dimensions measuring correct values; note text present. Agent VM has no Python/ezdxf and LibreCAD plugins are disabled; the DXF must be written by LibreCAD, and writes by other processes are flagged by a file audit log.

建议部分得分

45% geometry exact; 15% layers & linetypes; 30% dims; 10% note

R07.05.01.01-T07 Re-layer a messy DXF to the office CAD standard and purge it

原始指令

fixtures/consultant_mep.dxf has 1,900 entities all on layer 0 with colors by entity. Per docs/cad_layer_map.csv (color → target layer), move entities to the target layers created with the listed colors and linetypes, set entity colors to ByLayer, purge unused layers, blocks and linetypes, and save as out/mep_clean.dxf in LibreCAD.

平台: mac · macOS win · Windows lin · Linux
应用: LibreCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 nav · 平移 / 缩放 / 滚动
工作产物: WP04 · 三维 / 空间模型
条件: 未声明
提案难度: 2 / 5

建议验证方式

ezdxf: every entity on the layer mapped from its original color; colors ByLayer; layer table equals CSV (names, colors, linetypes) with no extras; geometry unchanged (hash per entity). Agent VM has no Python/ezdxf and LibreCAD plugins are disabled; the DXF must be written by LibreCAD (its header), and writes by other processes are flagged by a file audit log.

建议部分得分

50% entities correctly layered (scaled); 20% ByLayer; 20% layer table; 10% purge

R07.05.01.01-T08 Attach and align a survey xref to the site grid and clip it

原始指令

In BricsCAD V25 open fixtures/site_plan.dwg. Attach input/topo_survey.dwg as an overlay xref, align it to the project grid using the two control points CP1/CP2 given in input/control.txt (survey coords → project coords, no scaling), clip it to the site boundary polyline and set its layers to color 8. Save.

平台: win · Windows mac · macOS lin · Linux
应用: BricsCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: geom · 精确几何 click · 指向与点击 nav · 平移 / 缩放 / 滚动
工作产物: WP04 · 三维 / 空间模型
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

DXF: xref block (overlay) to topo_survey.dwg; insert transform maps CP1/CP2 to project coords within 5 mm and scale 1.000; spatial clip boundary equals site polyline vertices; xref layer overrides color 8. BricsCAD LISP, .scr scripts and BRX add-ins (plus .NET/VBA on Windows) are disabled for the agent; DWG/DXF files written by any process other than BricsCAD are flagged by a file audit log.

建议部分得分

20% xref overlay attached; 50% alignment accuracy; 20% clip; 10% layer color

R07.05.01.01-T09 Build a sheet set with field-driven title blocks and publish a multi-sheet PDF

原始指令

Using fixtures/hospital_wing/*.dwg, create sheet set HW.dst in AutoCAD Sheet Set Manager with subsets Plans and Sections and 6 sheets (A101-A104, A301-A302) from named layouts. Replace static title-block text with SheetSet fields for sheet number, title and project. Publish all 6 to out/HW_set.pdf in order.

平台: win · Windows
应用: AutoCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 drag · 拖放 type · 文字与表单
工作产物: WP03 · 视觉排版
条件: licensed · 授权专业软件 long · 长流程
提案难度: 4 / 5

建议验证方式

Parse .dst: 2 subsets, 6 sheets with numbers/titles from key; title blocks contain FIELD codes referencing SheetSet properties (DXF field objects); PDF has 6 pages in order with OCR'd sheet numbers matching. AutoLISP, .scr scripts and ActiveX/.NET automation disabled; the DWG must be saved by AutoCAD, with its command log checked.

建议部分得分

30% sheet set structure; 35% fields in title blocks; 35% published PDF order/content

R07.05.01.01-T10 Control pair of T01: generate the apartment plan DXF with ezdxf

原始指令

Control pair of T01. Without any CAD GUI, write a Python ezdxf script that reproduces input/apt_L3_plan.pdf (same layers, 42 associative-style linear dimensions, doors with swing arcs) and saves out/apt_L3.dxf. Dimensions must be measured from the PDF and drawing data you transcribe.

平台: lin · Linux mac · macOS
应用: ezdxf
交互表面: term · 终端
GUI 需求 · 任务设定: CL · CLI 足够
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: code · 代码与命令
工作产物: WP04 · 三维 / 空间模型
条件: 未声明
提案难度: 4 / 5

建议验证方式

Same geometry/dimension/layer checks as T01 on the DXF. Used to compare GUI vs script modality on identical grading.

建议部分得分

40% wall/opening geometry; 20% doors & windows; 30% dimensions; 10% layering

R07.05.01.01-T11 Redesign a stair per RFI and update plan, section and dimensions

原始指令

RFI-014 (input/rfi_014.pdf) changes stair S2 in fixtures/townhouse.dwg from 16 to 17 risers at the same floor-to-floor 2,975 mm with going 250 mm. Update the stair in plan (treads, arrow, break line) and in section A-A (risers, nosing line, handrail at 900 mm), update all affected dimensions and the riser/going note.

平台: win · Windows mac · macOS
应用: AutoCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: geom · 精确几何 click · 指向与点击 vis · 视觉判断
工作产物: WP04 · 三维 / 空间模型
条件: licensed · 授权专业软件
提案难度: 5 / 5

建议验证方式

DXF: plan has 16 treads at 250 mm (±0.5); section has 17 risers of 175 mm (±0.5) and pitch line consistent; handrail 900 mm above nosing; dims show 17R@175 / 16T@250; overall run updated. Scripting disabled.

建议部分得分

30% plan treads; 35% section risers; 15% handrail; 20% dims & note

R07.05.01.01-T12 Trace a scaled PDF underlay of a legacy plan into clean vector geometry

原始指令

In BricsCAD attach input/1978_warehouse_plan.pdf (raster scan) as underlay, calibrate scale using the 36,000 mm overall dimension, and trace exterior walls, column grid (12 columns) and dock openings as polylines on layers A-WALL, S-COLS, A-OPEN. Save out/warehouse.dwg in mm with the underlay detached.

平台: win · Windows mac · macOS lin · Linux
应用: BricsCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: path · 连续路径 geom · 精确几何 vis · 视觉判断
工作产物: WP04 · 三维 / 空间模型
条件: licensed · 授权专业软件
提案难度: 4 / 5

建议验证方式

DXF: exterior wall polylines vs reference Hausdorff ≤150 mm; 12 column centers within 100 mm; overall length 36,000±50 mm; underlay detached; layers correct. Raster-to-vector tools, BricsCAD LISP, .scr scripts and BRX add-ins (plus .NET/VBA on Windows) are disabled for the agent; DWG/DXF files written by any process other than BricsCAD are flagged by a file audit log.

建议部分得分

20% scale calibrated; 40% walls; 25% columns; 15% openings & layers

R07.05.01.01-T13 Hatch wall cavities and insulation to the office hatch standard

原始指令

In fixtures/detail_eaves.dwg apply hatches per docs/hatch_std.pdf: masonry ANSI31 scale 10 at 45°, insulation as BATTING-style line pattern scale 50, concrete AR-CONC scale 1, all associative and on layer A-DETL-PATT. Every closed region labelled in input/regions.png must be hatched exactly once.

平台: win · Windows mac · macOS
应用: AutoCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: click · 指向与点击 vis · 视觉判断 nav · 平移 / 缩放 / 滚动
工作产物: WP04 · 三维 / 空间模型
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

DXF HATCH entities: pattern/scale/angle per region category; associative flag set; boundary area vs reference region areas within 1%; no region hatched twice; layer correct. AutoLISP and .scr scripts disabled (plus ActiveX/.NET on Windows); the DWG must be saved by AutoCAD, and its command log is checked for HATCH use.

建议部分得分

40% regions hatched once; 35% pattern/scale/angle; 15% associative; 10% layer

R07.05.01.01-T14 Extract door attributes into a linked schedule table on the sheet

原始指令

fixtures/office_L1.dwg has 37 door blocks with attributes MARK, WIDTH, HEIGHT, FIRE. Using Data Extraction, create a door schedule table on layout A601 sorted by MARK with columns MARK, WIDTH, HEIGHT, FIRE, COUNT (grouped by type), linked so it can be updated. Use table style SCHED.

平台: win · Windows
应用: AutoCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 type · 文字与表单
工作产物: WP02 · 记录 / 表格
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

DXF: ACAD_TABLE on A601 with table style SCHED; rows equal grouped attribute data (key); sorted; data link/extraction object present (.dxe referenced). AutoLISP, .scr scripts and ActiveX/.NET automation disabled; the DWG must be saved by AutoCAD, and its command log is checked for the Data Extraction wizard.

建议部分得分

45% table data correct; 20% sorting/grouping; 20% linked extraction; 15% style/location

R07.05.01.01-T15 Bring a drawing into compliance with a CAD standards file

原始指令

Associate docs/company.dws with fixtures/consultant_arch.dwg in AutoCAD, run Check Standards, and fix every non-standard layer, linetype, text style and dimension style (mapping per the .dws, merging non-standard layers into their standard equivalents). Save so that Check Standards reports 0 problems.

平台: win · Windows
应用: AutoCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击
工作产物: WP04 · 三维 / 空间模型
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

Grader runs the standards audit (layer/linetype/style tables vs .dws) on DXF: 0 non-standard items; entity counts per standard layer equal key after merges; geometry unchanged. AutoLISP, .scr scripts and ActiveX/.NET automation disabled; the DWG must be saved by AutoCAD, and its command log is checked for CHECKSTANDARDS fixes.

建议部分得分

35% layers; 20% linetypes; 20% text styles; 25% dim styles

R07.05.01.01-T16 Draw room area boundaries and field-linked area tags in square metres

原始指令

In fixtures/clinic_L2.dwg draw a closed polyline on layer A-AREA inside the wall faces of each of the 19 rooms named in input/room_list.csv, and place an MTEXT tag in each room with the room name and a FIELD showing the polyline area in m² to 2 decimals. Save.

平台: win · Windows mac · macOS
应用: AutoCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: path · 连续路径 geom · 精确几何 type · 文字与表单
工作产物: WP04 · 三维 / 空间模型
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

DXF: 19 closed LWPOLYLINEs on A-AREA, each area within 0.5% of the reference room polygon (matched by containment); 19 MTEXT with names and area FIELDs referencing the correct polyline object IDs; displayed values correct. AutoLISP and .scr scripts disabled (plus ActiveX/.NET on Windows); the DWG must be saved by AutoCAD, with its command log checked.

建议部分得分

50% room boundaries (scaled); 30% field-linked tags; 20% names correct

R07.05.01.01-T17 Set annotative scales so text reads correctly in 1:100 and 1:20 viewports

原始指令

In fixtures/bathroom_pod.dwg (AutoCAD for Mac) layout A501 has a 1:100 overview viewport and a 1:20 detail viewport. Make all room tags, dimensions and notes annotative with the correct scale representations so they plot at 2.5 mm in both viewports, hide 1:100 annotations in the detail where they duplicate, and plot out/A501.pdf.

平台: mac · macOS win · Windows
应用: AutoCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 nav · 平移 / 缩放 / 滚动 vis · 视觉判断
工作产物: WP03 · 视觉排版
条件: licensed · 授权专业软件
提案难度: 4 / 5

建议验证方式

DXF: target objects annotative with 1:100 and/or 1:20 scale contexts per key; viewport scales exact; PDF text heights measured 2.5±0.15 mm in both regions; no duplicate tags in detail (OCR count). AutoLISP and .scr scripts disabled (plus ActiveX/.NET on Windows); the DWG must be saved by AutoCAD, with its command log checked.

建议部分得分

35% annotative flags; 30% scale contexts per object; 35% plotted heights & no duplicates

R07.05.01.01-T18 Trace a cadastral parcel from a scanned map image in LibreCAD

原始指令

Insert input/parcel_scan.png in LibreCAD, scale it using the two surveyed corners marked A (1000,1000) and B (1086.40,1052.15) in metres, then trace the 9-vertex parcel boundary and the building footprint as closed polylines on layers PARCEL and BLDG. Label each boundary segment with its length (2 decimals). Save out/parcel.dxf.

平台: mac · macOS win · Windows lin · Linux
应用: LibreCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: path · 连续路径 geom · 精确几何 vis · 视觉判断
工作产物: WP04 · 三维 / 空间模型
条件: 未声明
提案难度: 4 / 5

建议验证方式

ezdxf: parcel polyline 9 vertices each within 0.2 m of reference; building within 0.3 m; A and B within 0.05 m; 9 length labels matching drawn segment lengths ±0.01. Agent VM has no Python/ezdxf and LibreCAD plugins are disabled; the DXF must be written by LibreCAD, and writes by other processes are flagged by a file audit log.

建议部分得分

20% image scaled/placed; 45% parcel vertices; 20% building; 15% labels

R07.05.01.01-T19 Recover a damaged drawing, remove duplicate geometry and purge

原始指令

fixtures/damaged_site.dwg reports errors on open. In AutoCAD run Recover and Audit with fix, remove overlapping duplicate lines/arcs with Overkill (tolerance 0.5 mm), purge unused items and regapps, and save out/site_recovered.dwg.

平台: win · Windows mac · macOS
应用: AutoCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 type · 文字与表单
工作产物: WP04 · 三维 / 空间模型
条件: licensed · 授权专业软件
提案难度: 2 / 5

建议验证方式

Saved file opens with 0 audit errors (ODA audit); duplicate entity count 0 at 0.5 mm; visible geometry union equal to fixture union (raster XOR <0.1%); unused blocks/regapps count 0. AutoLISP and .scr scripts disabled (plus ActiveX/.NET on Windows); the DWG must be saved by AutoCAD, with its command log checked.

建议部分得分

35% recovered & audit-clean; 40% duplicates removed; 25% purge

R07.05.01.01-T20 Author a dynamic door block with lookup widths, flip and visibility states

原始指令

In AutoCAD Block Editor create dynamic block DOOR_DYN: leaf widths 700/800/900/1000 via linear parameter with lookup, flip parameters for hinge side and swing, visibility states SINGLE and DOUBLE, and an attribute MARK. Replace the 8 static doors in fixtures/flat_type_B.dwg with DOOR_DYN set to match input/door_schedule.csv. Save.

平台: win · Windows
应用: AutoCAD
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: geom · 精确几何 click · 指向与点击 type · 文字与表单
工作产物: WP04 · 三维 / 空间模型
条件: licensed · 授权专业软件 long · 长流程
提案难度: 5 / 5

建议验证方式

DXF: DOOR_DYN with dynamic parameter/action objects (linear+lookup, 2 flips, visibility) in block's extension dictionary; 8 inserts with dynamic property values (width, flip, visibility) equal schedule and positions equal old doors (±1 mm); MARK attributes set. AutoLISP, .scr scripts and ActiveX/.NET automation disabled; the DWG must be saved by AutoCAD, with its command log checked.

建议部分得分

35% dynamic block parameters/actions; 15% visibility states; 35% 8 doors set per schedule; 15% attributes

已有研究映射

以下沿用研究目录中的基准与小类映射，不是逐题标注、执行记录或产品背书。

二维CAD绘图与修订

任务提案 · 20

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

已有研究映射

同工作流族的小类