R07.07.01.01 · 任务小类

CAM刀路与毛坯仿真

CAM toolpaths & stock simulation

Program toolpaths that machine the part without gouges or collisions.

20 条本项目编写的提案 · 分类 v1.1 · 新增基准运行 0 次。下方验证方式与部分得分规则是设计，不是执行结果。

典型应用: PowerMill · Fusion CAM · Mastercam · NX CAM
小类 GUI 需求标签: G3 · 仅 GUI

数字员工关联

本项目的小类归属，不代表员工能力实证或已导入基准覆盖。验收与价值指标均为建议，未测量 ROI。

关联岗位

工程与技术设计 · 具体工程交付包括约束完整的零件、有效修改与装配、工程图、测量结果、有限元结果及经过仿真的刀路。

对照全部数字员工工作流设计

任务提案 · 20

展开查看完整原文与建议检查方式；两种界面均保留提案英文原文。

R07.07.01.01-T01 Program roughing and finishing for a mold core in PowerMill without gouges

原始指令

In PowerMill 2025 copy template project fixtures/pm_blank to out/core_4471, import model input/core_4471.step and block from the model with 2 mm allowance. Using only the preconfigured tools in the project, create a model-area-clearance rough (0.3 mm thickness) and finishing toolpaths (steep-and-shallow plus corner rest) so the core finishes to ±0.02 mm, with no collisions or gouges. Run stock simulation and save.

平台: win · Windows
应用: PowerMill
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 vis · 视觉判断 nav · 平移 / 缩放 / 滚动
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件 long · 长流程
提案难度: 4 / 5

建议验证方式

Harness exports NC per toolpath; independent voxel sim on core model: gate = 0 gouges and 0 holder collisions; score 0.7·(share of surface within 0.3 mm) + 0.3·(share within 2 mm); only template tools used. PowerMill macros/API disabled except harness export.

建议部分得分

15% project/block setup; 25% roughing valid; 40% finish share ≤0.3 mm; 20% stock sim saved, no collisions

R07.07.01.01-T02 Program a 3-axis aluminium bracket with adaptive, contour and drilling ops

原始指令

In Autodesk Fusion open fixtures/bracket_6061.f3d. Create setup (stock +1 mm sides/+2 mm top, WCS at top-front-left), 2D adaptive clearing with a 10 mm 3-flute endmill, 2D contour finish, spot + drill for the 4× Ø6.6 holes and a 0.5 mm chamfer. Simulate with stock and post to out/bracket.nc using the Haas Next Generation post.

平台: win · Windows mac · macOS
应用: Fusion CAM
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: click · 指向与点击 type · 文字与表单 vis · 视觉判断
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

Independent sim of posted NC vs part: 0 gouges, 0 rapid-into-stock; machined part within 0.05 mm on contour faces; holes Ø6.6 at positions ±0.02 mm; chamfer present; WCS correct. Fusion API scripts disabled; harness reads setup via its own add-in.

建议部分得分

15% setup/WCS; 30% adaptive+contour; 35% holes & chamfer; 20% posted NC passes sim

R07.07.01.01-T03 Machine a mold cavity under a 25-minute cycle-time limit in Fusion

原始指令

For fixtures/cavity_P20.f3d create adaptive clearing (12 mm bull nose) and parallel finishing (6 mm ball, 0.2 mm stepover) plus a pencil pass for fillets. Total machining time must be under 25 min at the library feeds, scallop height ≤0.01 mm on the floor. Simulate, export a setup sheet to out/setup.html and post out/cavity.nc.

平台: win · Windows mac · macOS
应用: Fusion CAM
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 vis · 视觉判断 type · 文字与表单
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 4 / 5

建议验证方式

Sim of NC: 0 gouges; remaining stock ≤0.02 mm on 95% of cavity surface; computed cycle time (grader kinematic model) <25 min; stepover/scallop from setup sheet; setup sheet exists. Fusion API scripts/add-ins are disabled for the agent (only the harness add-in loads); the grader re-posts the saved .f3d setup and the NC must match it, so hand-edited G-code fails.

建议部分得分

25% roughing; 30% finish quality; 25% cycle time; 20% setup sheet & post

R07.07.01.01-T04 Fix a pocket operation whose depth exceeds the tool's flute length

原始指令

In fixtures/deep_pocket.f3d the '2D Pocket1' operation cuts 32 mm deep with a 6 mm endmill whose flute length is 18 mm and fails simulation with holder collision. Fix it with multiple depth stepdowns ≤2 mm and a longer-reach tool from the library (stick-out ≥ 35 mm), resimulate with no collisions and repost.

平台: win · Windows mac · macOS
应用: Fusion CAM
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: click · 指向与点击 type · 文字与表单
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 2 / 5

建议验证方式

NC sim: 0 holder collisions; max Z step ≤2 mm; tool stick-out ≥35 mm; pocket finished to depth ±0.02 mm. Fusion API scripts/add-ins are disabled for the agent (only the harness add-in loads); the grader re-posts the saved .f3d setup and the NC must match it, so hand-edited G-code fails.

建议部分得分

40% collision fixed; 30% stepdowns; 30% pocket correct

R07.07.01.01-T05 Program a plate with Dynamic Mill, chamfer and rigid tapping in Mastercam

原始指令

In Mastercam 2025 open fixtures/plate_A.mcam. Create Dynamic Mill for the two open pockets (12 mm endmill, 10% stepover), a contour chamfer 1×45° with a 90° spot drill, drill and rigid-tap 6× M8×1.25 to 16 mm, verify in Mastercam Simulator, and post with the generic Fanuc 3X post to out/plate_A.nc.

平台: win · Windows
应用: Mastercam
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: click · 指向与点击 vis · 视觉判断 type · 文字与表单
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

NC parse: G84 tapping with F = S×1.25; depths; independent sim: pockets to ±0.05 mm, chamfer size, no gouges; Mastercam C-Hooks/NET-Hooks disabled.

建议部分得分

35% pockets; 15% chamfer; 30% tapping cycles correct; 20% verify & post

R07.07.01.01-T06 Program 5-axis blade finishing on an impeller in NX CAM

原始指令

In Siemens NX 2406 open fixtures/impeller_7blade.prt. Using the Turbomachinery Milling operations, rough the hub passages, finish blades with flank (swarf) where possible and point milling elsewhere, finish hub and fillets, with tool axis limits for the machine kit 'DMU50'. Run IS&V machine simulation with no collisions and post to out/impeller.mpf.

平台: win · Windows lin · Linux
应用: NX CAM
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: click · 指向与点击 vis · 视觉判断 nav · 平移 / 缩放 / 滚动
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件 long · 长流程
提案难度: 5 / 5

建议验证方式

Grader sim of posted 5-axis NC on machine kinematics: 0 collisions/axis-limit violations; blade surface deviation ≤0.05 mm on 95%; hub ≤0.1 mm; all 7 passages machined. NX Open journals disabled.

建议部分得分

20% hub roughing; 35% blade finish; 15% hub/fillet; 30% machine sim clean

R07.07.01.01-T07 Create a FreeCAD CAM job with profile and pocket operations and post LinuxCNC

原始指令

In FreeCAD 1.0 CAM workbench open fixtures/plate.FCStd. Create a job with 100×80×10 mm stock, a 6 mm flat endmill tool controller (S 12000, F 800), a Pocket Shape for the slot and a Profile for the outline with 4 holding tabs, then post-process with the LinuxCNC post to out/plate.ngc.

平台: mac · macOS win · Windows lin · Linux
应用: FreeCAD CAM
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G2 · GUI 必要
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 type · 文字与表单
工作产物: WP06 · 代码 / 工程
条件: 未声明
提案难度: 2 / 5

建议验证方式

Document parse: job stock, tool controller params, pocket and profile ops; NC sim (CAMotics) vs part: slot within 0.05 mm, outline cut except 4 tabs; no gouges. FreeCAD Python console disabled.

建议部分得分

40% job/stock & tool controller; 25% pocket; 25% profile + tabs; 10% post

R07.07.01.01-T08 Program OD turning, grooving and threading for a shaft in Fusion

原始指令

In fixtures/shaft_4140.f3d create a turning setup (bar Ø40, chuck at Z-80), facing, OD roughing (CNMG, 2 mm DOC), OD finishing, a 3 mm groove at Z-55, and an M20×1.5 thread over 25 mm; simulate and post with the Haas ST post to out/shaft.nc.

平台: win · Windows mac · macOS
应用: Fusion CAM
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: click · 指向与点击 type · 文字与表单 vis · 视觉判断
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 4 / 5

建议验证方式

Lathe sim of NC: profile within 0.02 mm on diameters; groove width/position ±0.02; G76 thread pitch 1.5, minor diameter per ISO; no chuck collision. Fusion API scripts/add-ins are disabled for the agent (only the harness add-in loads); the grader re-posts the saved .f3d setup and the NC must match it, so hand-edited G-code fails.

建议部分得分

15% setup; 35% roughing/finishing profile; 20% groove; 30% threading

R07.07.01.01-T09 Add rest machining so remaining stock in corners drops below 0.3 mm

原始指令

PowerMill project fixtures/pm_housing has a roughing with a 16 mm tool leaving material in internal corners. Add rest roughing with an 8 mm and then a 4 mm tool referencing the previous stock models, and corner finishing, so remaining material is ≤0.3 mm everywhere except designated undercut faces. Update the stock model and save.

平台: win · Windows
应用: PowerMill
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: click · 指向与点击 vis · 视觉判断 nav · 平移 / 缩放 / 滚动
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 4 / 5

建议验证方式

Voxel sim of all NC: remaining material ≤0.3 mm on ≥98% of non-undercut faces; 0 gouges/collisions; rest toolpaths reference stock models (project XML via harness). PowerMill macros and API add-ins are disabled for the agent; the project and NC written by any process other than PowerMill are flagged by a file audit log.

建议部分得分

30% rest rough 8 mm; 30% rest 4 mm/corner; 40% remaining-stock target

R07.07.01.01-T10 Build a tool library from a vendor catalog and apply it to a job

原始指令

Create Fusion tool library 'Shop_Alu' with the 6 tools in input/vendor_catalog.pdf (geometry, holder, flute length, recommended feeds/speeds for 6061 as presets), then replace the tools in fixtures/cover_plate.f3d operations with matching library tools and regenerate toolpaths.

平台: win · Windows mac · macOS
应用: Fusion CAM
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: type · 文字与表单 click · 指向与点击
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

Exported library JSON: 6 tools with geometry ±0.01 mm and presets equal catalog; job ops reference library tool GUIDs; toolpaths regenerated (no invalid ops). Fusion API scripts/add-ins are disabled for the agent (only the harness add-in loads); the library must exist in the saved Fusion tool library read by that add-in, so a hand-written JSON fails.

建议部分得分

50% tool definitions; 20% presets; 30% tools applied & regenerated

R07.07.01.01-T11 Program a two-setup flip job with matching work offsets in Mastercam

原始指令

fixtures/manifold_block.mcam needs Op1 (top features) and Op2 (flipped, bottom features). Create both setups with G54/G55 work offsets per input/fixture_sheet.pdf, machine features in each, verify the stock carries over from Op1 to Op2 in Simulator, and post one program per setup.

平台: win · Windows
应用: Mastercam
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: click · 指向与点击 vis · 视觉判断 geom · 精确几何
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

NC: two programs with G54/G55; grader sim chaining stock across flip transform: all features within ±0.05 mm; 0 gouges; flipped WCS matches fixture sheet. Mastercam C-Hooks/NET-Hooks and VBScript are disabled for the agent; .mcam and NC files written by any process other than Mastercam are flagged by a file audit log.

建议部分得分

25% setups/WCS; 30% Op1; 30% Op2; 15% stock carry-over verified

R07.07.01.01-T12 Drill angled holes with 3+2 positioning on a hydraulic manifold in NX

原始指令

In NX CAM for fixtures/manifold_5x.prt create 3+2 operations for the 9 angled cross-holes (spot, drill, ream Ø8H7) using tool-axis definitions per hole, with the 'DMU50' machine kit and optimal B/C angle sequencing to minimize table rotations. Simulate and post.

平台: win · Windows lin · Linux
应用: NX CAM
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 vis · 视觉判断 nav · 平移 / 缩放 / 滚动
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 4 / 5

建议验证方式

NC sim on kinematics: 9 holes axis direction within 0.05°, position ±0.02 mm, depth ±0.05; 0 collisions; number of B/C reorientations ≤ grader's optimum +2. NX Open journals and Python are disabled for the agent; .prt and NC files written by any process other than NX are flagged by a file audit log.

建议部分得分

40% hole axes/positions; 20% drill/ream cycles; 20% no collisions; 20% sequencing

R07.07.01.01-T13 Finish steep walls and fillets with holder-aware 3D contour and pencil passes

原始指令

In fixtures/die_insert.f3d add a 3D Contour finishing (6 mm ball, 0.1 mm stepdown) restricted to faces >40° and a Pencil pass for fillets with a 3 mm ball, using holder clearance 2 mm so the toolpath trims where the holder would hit. Simulate with holder collision checking and post.

平台: win · Windows mac · macOS
应用: Fusion CAM
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 vis · 视觉判断 nav · 平移 / 缩放 / 滚动
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

NC sim: 0 holder collisions; steep-face deviation ≤0.02 mm on 95%; fillet remaining stock ≤0.05 mm; slope containment correct. Fusion API scripts/add-ins are disabled for the agent (only the harness add-in loads); the grader re-posts the saved .f3d setup and the NC must match it, so hand-edited G-code fails.

建议部分得分

35% contour; 30% pencil; 35% holder-safe

R07.07.01.01-T14 Simulate a 5-axis machine in PowerMill and remove collisions with axis limits

原始指令

fixtures/pm_turbine_housing has 5-axis swarf toolpaths that collide with the head on machine model 'Hermle_C42'. Run machine tool simulation, then modify tool-axis settings (lead/lean, axis limits, automatic collision avoidance) until machine simulation reports no collisions or axis-limit errors, preserving surface finish. Save the project.

平台: win · Windows
应用: PowerMill
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: vis · 视觉判断 nav · 平移 / 缩放 / 滚动 click · 指向与点击
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件 long · 长流程
提案难度: 5 / 5

建议验证方式

Grader kinematic sim of NC on Hermle model: 0 collisions/limit violations; surface deviation on swarf faces ≤0.03 mm on 95%; no toolpaths deleted. PowerMill macros and API add-ins are disabled for the agent; the project and NC written by any process other than PowerMill are flagged by a file audit log.

建议部分得分

25% collisions found; 45% collisions removed; 30% finish preserved

R07.07.01.01-T15 Control pair of T07: generate the FreeCAD CAM job by Python script

原始指令

Control pair of T07. Using FreeCAD headless Python (FreeCADCmd) only, create the same job, tool controller, pocket and profile-with-tabs operations for fixtures/plate.FCStd and post to out/plate.ngc.

平台: lin · Linux mac · macOS
应用: FreeCAD CAM
交互表面: term · 终端
GUI 需求 · 任务设定: CL · CLI 足够
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: code · 代码与命令
工作产物: WP06 · 代码 / 工程
条件: 未声明
提案难度: 2 / 5

建议验证方式

Same checks as T07 on document and NC. Compared with T07 for GUI vs script gap.

建议部分得分

40% job/stock & tool controller; 25% pocket; 25% profile + tabs; 10% post

R07.07.01.01-T16 Cut cycle time by 20% on an existing Mastercam program without overloading tools

原始指令

fixtures/housing_prod.mcam runs 41 min. Reduce simulated cycle time by ≥20% by changing strategies (e.g. Dynamic Mill/OptiRough), stepovers and linking, keeping each tool's chip load and radial engagement within the limits in docs/tool_limits.csv and part tolerance unchanged. Post the new program.

平台: win · Windows
应用: Mastercam
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: click · 指向与点击 vis · 视觉判断 type · 文字与表单
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 4 / 5

建议验证方式

Grader kinematic sim: cycle ≤32.8 min; engagement/chip load per move within limits; part within tolerance; 0 gouges. Mastercam C-Hooks/NET-Hooks and VBScript are disabled for the agent; .mcam and NC files written by any process other than Mastercam are flagged by a file audit log.

建议部分得分

45% cycle reduction (scaled); 30% tool limits respected; 25% part correct

R07.07.01.01-T17 Program plywood router parts with tabs and lead-ins on a sheet

原始指令

In Fusion open fixtures/cabinet_parts.f3d (8 flat parts already arranged on a 2440×1220×18 mm sheet). Create 2D contour ops with a 6 mm compression bit: inside features first, outside profiles last, 3 tabs per part (8×4 mm), ramp lead-ins, depth 18.3 mm into spoilboard. Simulate and post with the generic router post.

平台: win · Windows mac · macOS
应用: Fusion CAM
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 type · 文字与表单 vis · 视觉判断
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

NC parse/sim: all inside cuts precede outside profile per part; 3 tabs per part with dims; ramps on entries; depth 18.3; parts geometry within 0.1 mm. Fusion API scripts/add-ins are disabled for the agent (only the harness add-in loads); the grader re-posts the saved .f3d setup and the NC must match it, so hand-edited G-code fails.

建议部分得分

25% cut order; 30% tabs; 15% ramps; 30% geometry

R07.07.01.01-T18 Rough with cavity mill and finish with Z-level using IPW and clamp check geometry

原始指令

In NX CAM for fixtures/mold_plate.prt create Cavity Mill roughing using in-process workpiece, then Z-Level finishing on steep walls using the IPW from roughing, with the two clamps in the assembly as check geometry (5 mm clearance). Verify with 3D dynamic simulation and post.

平台: win · Windows lin · Linux
应用: NX CAM
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: click · 指向与点击 vis · 视觉判断 nav · 平移 / 缩放 / 滚动
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

NC sim: tool never within 5 mm of clamps; steep walls within 0.02 mm; ops reference IPW (part file via harness export); 0 gouges. NX Open journals and Python are disabled for the agent; .prt and NC files written by any process other than NX are flagged by a file audit log.

建议部分得分

30% cavity mill; 30% z-level; 25% clamp avoidance; 15% IPW use

R07.07.01.01-T19 Post a Fanuc program with specific post properties and verify its structure

原始指令

Post the existing setup in fixtures/gearbox_cover.f3d with the Fanuc post using: sequence numbers off, tool pre-select on, G28 home via Z only, coolant M08 for all ops except chamfer (air M07 mapping per docs/machine_notes.md), output to O1234 program number. Save to out/O1234.nc.

平台: win · Windows mac · macOS
应用: Fusion CAM
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 type · 文字与表单
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

NC text checks: O1234 header; no N-words; T next-tool preselect after each M06; G28 G91 Z0 only; coolant codes per op; toolpath identical to reference posting otherwise. Fusion API scripts/add-ins are disabled for the agent (only the harness add-in loads); the grader re-posts the saved .f3d setup and the NC must match it, so hand-edited G-code fails.

建议部分得分

20% program number; 20% sequence numbers off; 20% preselect; 40% G28 & coolant mapping

R07.07.01.01-T20 Recognize and drill 48 holes with chamfers and peck cycles in PowerMill

原始指令

In fixtures/pm_baseplate use hole feature recognition to create feature sets for the 48 holes (Ø6.8 tapped M8, Ø10H7 reamed, Ø14 counterbored), then create drilling toolpaths: spot/chamfer, peck drill (Q 3 mm), ream and counterbore, ordered to minimize tool changes. Simulate and save.

平台: win · Windows
应用: PowerMill
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G3 · 仅 GUI
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 vis · 视觉判断
工作产物: WP06 · 代码 / 工程
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

NC: all 48 holes produced with correct cycles (G83 with Q3 for drills); diameters/depths per feature; tool change count ≤ minimum + 1; no collisions. PowerMill macros and API add-ins are disabled for the agent; the project and NC written by any process other than PowerMill are flagged by a file audit log.

建议部分得分

25% feature recognition; 45% correct cycles per hole class; 15% ordering; 15% sim clean

已有研究映射

以下沿用研究目录中的基准与小类映射，不是逐题标注、执行记录或产品背书。

CAM刀路与毛坯仿真

数字员工关联

关联岗位

任务提案 · 20

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

已有研究映射

同工作流族的小类