R08.01.01.04 · 任务小类

数据绘图与曲线拟合

Data plotting & curve fitting

Plot experimental data and fit models with correct uncertainties.

20 条本项目编写的提案 · 分类 v1.1 · 新增基准运行 0 次。下方验证方式与部分得分规则是设计，不是执行结果。

典型应用: ROOT · OriginPro · Igor Pro
小类 GUI 需求标签: HY · 混合

任务提案 · 20

展开查看完整原文与建议检查方式；两种界面均保留提案英文原文。

R08.01.01.04-T01 Fit a peak with background in ROOT's FitPanel

原始指令

Open fixtures/run42.root in a ROOT TBrowser, draw the histogram 'mass', and with the FitPanel fit gaus+pol1 on [80,100] GeV (chi-square, default options). Save the canvas to output/mass_fit.root and write the Gaussian mean and sigma with errors to output/fit.json.

平台: mac · macOS win · Windows lin · Linux
应用: ROOT
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G2 · GUI 必要
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 type · 文字与表单 vis · 视觉判断
工作产物: WP07 · 仿真结果
条件: 未声明
提案难度: 2 / 5

建议验证方式

Grader reads the TF1 attached to the saved histogram: formula gaus+pol1, range [80,100]; mean/sigma within 1% of reference fit and errors within 5%. The ROOT prompt/macros are disabled for the agent (GUI-only session); grader reads the saved .root canvas/function objects.

建议部分得分

30% correct model/range; 50% mean and sigma; 20% errors reported.

R08.01.01.04-T02 Fit an exponential decay with error bars in OriginPro

原始指令

In OriginPro, import fixtures/decay.csv (t, y, y_err), make a scatter plot with Y error bars, fit y = A*exp(-t/tau) + y0 with instrumental weighting using the NLFit dialog, and report A, tau, y0 with standard errors and reduced chi-square. Save output/decay.opju.

平台: win · Windows
应用: OriginPro
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G2 · GUI 必要
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 type · 文字与表单 vis · 视觉判断
工作产物: WP07 · 仿真结果
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

Grader reads the project: plot with error bars bound to y_err; NLFit operation with the right function and instrumental weighting; parameters within 0.5% and errors within 5% of reference. Code Builder, Python console and COM are disabled; grader opens the .opju with its own originpro session and checks the fit operations.

建议部分得分

20% plot with error bars; 30% weighting/model setup; 50% parameters and chi-square.

R08.01.01.04-T03 Deconvolve three overlapping Voigt peaks in Igor Pro

原始指令

In Igor Pro, load fixtures/raman.txt, use the Multipeak Fitting package to fit 3 Voigt peaks on a linear baseline in 1,250-1,700 cm-1, and report each peak's center, FWHM and area in output/peaks.csv. Save output/raman.pxp.

平台: mac · macOS win · Windows
应用: Igor Pro
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G2 · GUI 必要
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 drag · 拖放 vis · 视觉判断
工作产物: WP07 · 仿真结果
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

Grader compares with the synthetic truth: centers within 1 cm-1, FWHM within 3%, areas within 3%; Multipeak Fit set saved in the experiment. Grader opens the .pxp in Igor; Igor's command line and procedure windows are disabled for the agent, so user procedure code must be empty and the history must contain only dialog-generated commands.

建议部分得分

20% baseline/range; 40% centers; 20% FWHM; 20% areas.

R08.01.01.04-T04 Run an unbinned signal-plus-background fit with RooFit

原始指令

Using RooFit on the unbinned tree fixtures/events.root (variable m in [5.0, 5.6] GeV), fit a Crystal Ball signal plus exponential background with an extended likelihood, report signal and background yields with errors, and compute the signal significance from a profile likelihood ratio. Plot with pulls to output/fit.pdf.

平台: mac · macOS win · Windows lin · Linux
应用: ROOT · RooFit
交互表面: term · 终端 desk · 桌面 GUI
GUI 需求 · 任务设定: HY · 混合
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: code · 代码与命令 vis · 视觉判断
工作产物: WP07 · 仿真结果
条件: 未声明
提案难度: 4 / 5

建议验证方式

Grader reruns the reference fit: yields within 2% and errors within 10%; significance within 0.2 sigma; plot exists with a pull panel.

建议部分得分

30% model built correctly; 40% yields; 20% significance; 10% plot.

R08.01.01.04-T05 Global-fit four dose-response curves with a shared Hill slope

原始指令

In OriginPro, import fixtures/dose_response.xlsx (4 compounds), fit all four with the DoseResp (4-parameter logistic) function as a global fit sharing the Hill slope, and report each EC50 with errors and the shared slope. Save output/dr.opju.

平台: win · Windows
应用: OriginPro · Excel
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G2 · GUI 必要
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 type · 文字与表单
工作产物: WP07 · 仿真结果
条件: licensed · 授权专业软件 multiapp · 多应用
提案难度: 4 / 5

建议验证方式

Grader reads the NLFit operation: global fit mode with only the Hill slope shared; EC50s within 1% and slope within 1% of reference. Code Builder, Python console and COM are disabled; grader opens the .opju with its own originpro session and checks the fit operations.

建议部分得分

40% global fit with correct sharing; 40% EC50s; 20% slope.

R08.01.01.04-T06 Fit a line with errors in both variables using ODR

原始指令

Fit fixtures/calib.csv (x, sx, y, sy) with a straight line using orthogonal distance regression (scipy.odr) and write slope, intercept, their standard errors and the reduced chi-square to output/odr.json.

平台: mac · macOS win · Windows lin · Linux
应用: Python · SciPy
交互表面: term · 终端
GUI 需求 · 任务设定: CL · CLI 足够
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: code · 代码与命令
工作产物: WP07 · 仿真结果
条件: 未声明
提案难度: 2 / 5

建议验证方式

Grader computes reference ODR: parameters within 0.1% and errors within 2%.

建议部分得分

60% parameters; 40% errors and chi-square.

R08.01.01.04-T07 Build a 2x2 publication figure with an inset in Origin

原始指令

In OriginPro, using the 4 datasets in fixtures/figure_data.opju, build a 2x2 multi-panel graph per input/figure_spec.pdf: shared x-axis label, log-scale y in panels b and d, panel labels a-d, Arial 8 pt, an inset in panel c, and export output/figure.tif at 600 dpi, 180 mm wide.

平台: win · Windows
应用: OriginPro
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G2 · GUI 必要
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 drag · 拖放 type · 文字与表单 vis · 视觉判断
工作产物: WP03 · 视觉排版
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

Grader inspects the project graph layers (scales, fonts, labels, inset layer) and the TIFF (dpi, width in px = 4252 +/-2); visual layout checked against spec by VLM rubric (stated). Code Builder, Python console and COM are disabled; grader opens the .opju with its own originpro session and checks the fit operations.

建议部分得分

40% layer/axis settings; 20% fonts/labels; 20% inset; 20% export spec.

R08.01.01.04-T08 Compute and fit a trigger efficiency curve in ROOT

原始指令

From fixtures/trigger.root (histograms 'pass' and 'total' vs pT), build a TEfficiency with Clopper-Pearson intervals, fit it with an error-function turn-on (0.5*eff*(1+erf((x-x0)/sigma))), and report plateau, x0 and sigma. Save the canvas and output/eff.json.

平台: mac · macOS win · Windows lin · Linux
应用: ROOT
交互表面: term · 终端 desk · 桌面 GUI
GUI 需求 · 任务设定: HY · 混合
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: code · 代码与命令 vis · 视觉判断
工作产物: WP07 · 仿真结果
条件: 未声明
提案难度: 3 / 5

建议验证方式

Grader reruns: interval method exact; fitted parameters within 2% of reference.

建议部分得分

30% efficiency construction; 70% fitted parameters.

R08.01.01.04-T09 Global-fit temperature-series spectra with linked constraints in Igor

原始指令

In Igor Pro, fit the 12 temperature-dependent absorption spectra in fixtures/temp_series.pxp with Global Fit: a Lorentzian whose center shifts linearly with temperature (shared slope and intercept), with widths constrained to 2-20 nm. Report the shared parameters and per-spectrum widths.

平台: mac · macOS win · Windows
应用: Igor Pro
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G2 · GUI 必要
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 type · 文字与表单
工作产物: WP07 · 仿真结果
条件: licensed · 授权专业软件 long · 长流程
提案难度: 5 / 5

建议验证方式

Grader opens the experiment: Global Fit setup with linked coefficients as specified and constraints; shared parameters within 1% and widths within 3% of truth. Grader opens the .pxp in Igor; Igor's command line and procedure windows are disabled for the agent, so user procedure code must be empty and the history must contain only dialog-generated commands.

建议部分得分

30% linking; 20% constraints; 50% fitted values.

R08.01.01.04-T10 Fit a power law on log axes in LabPlot

原始指令

In LabPlot, import fixtures/flux_vs_freq.csv, plot flux vs frequency with log-log axes, fit a power law y = a*x^b using LabPlot's fit dialog, and write a, b with errors to output/powerlaw.json. Save output/powerlaw.lml.

平台: mac · macOS win · Windows lin · Linux
应用: LabPlot
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G2 · GUI 必要
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: click · 指向与点击 type · 文字与表单
工作产物: WP07 · 仿真结果
条件: 未声明
提案难度: 2 / 5

建议验证方式

Grader parses the .lml: log axes, fit curve with power-law model; parameters within 1% of reference. The agent has no terminal and LabPlot's script editor is disabled, so the fit must be run in LabPlot's fit dialog; the file audit log must show the .lml saved by LabPlot.

建议部分得分

30% plot setup; 30% fit model; 40% parameters.

R08.01.01.04-T11 Integrate chromatogram peaks after baseline subtraction in Origin

原始指令

In OriginPro, open fixtures/hplc_run.csv, use Peak Analyzer to subtract a user-defined baseline (anchor points in valleys), find the 6 peaks and integrate their areas. Export the peak table to output/peaks.csv.

平台: win · Windows
应用: OriginPro
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G2 · GUI 必要
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 drag · 拖放 vis · 视觉判断
工作产物: WP07 · 仿真结果
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

Grader compares with the synthetic chromatogram truth: 6 peaks found, retention times within 0.01 min, areas within 2%. Code Builder, Python console and COM are disabled; grader opens the .opju with its own originpro session and checks the fit operations.

建议部分得分

30% baseline quality; 30% peak detection; 40% areas.

R08.01.01.04-T12 Choose between one- and two-mode damped oscillation models

原始指令

Fit fixtures/ringdown.csv with single- and double-mode damped sinusoid models using least squares, select the better model by AIC, and estimate parameter uncertainties by 1,000-sample bootstrap. Write the chosen model, parameters and 68% intervals to output/ringdown.json.

平台: mac · macOS win · Windows lin · Linux
应用: Python · SciPy
交互表面: term · 终端
GUI 需求 · 任务设定: CL · CLI 足够
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: code · 代码与命令
工作产物: WP07 · 仿真结果
条件: 未声明
提案难度: 4 / 5

建议验证方式

Grader: model choice matches the generating model; frequencies within 0.5% and damping times within 3%; bootstrap intervals contain truth and widths within 30% of reference.

建议部分得分

30% model selection; 40% parameters; 30% intervals.

R08.01.01.04-T13 Fit a 2D Gaussian to a detector hit map in ROOT

原始指令

Open fixtures/beamspot.root in a TBrowser, draw the TH2 'hits', fit a 2D Gaussian with correlation (custom TF2 via the FitPanel) and report centers, widths and correlation coefficient in output/beamspot.json. Save the fitted histogram.

平台: mac · macOS win · Windows lin · Linux
应用: ROOT
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G2 · GUI 必要
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 type · 文字与表单 vis · 视觉判断
工作产物: WP07 · 仿真结果
条件: 未声明
提案难度: 3 / 5

建议验证方式

Grader reads the saved TF2: parameters within 1% (correlation within 0.02) of reference. The ROOT prompt/macros are disabled for the agent (GUI-only session); grader reads the saved .root canvas/function objects.

建议部分得分

30% model with correlation; 70% parameters.

R08.01.01.04-T14 Extract a line profile from an image and fit an edge in Igor Pro

原始指令

In Igor Pro, load fixtures/knife_edge.tif as an image plot, draw a line profile across the edge at the marked row, and fit an error-function edge to get the 10-90% width in micrometers (pixel size 0.65 um). Save output/edge.pxp and the result to output/edge.json.

平台: mac · macOS win · Windows
应用: Igor Pro
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G2 · GUI 必要
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: path · 连续路径 click · 指向与点击 vis · 视觉判断
工作产物: WP07 · 仿真结果
条件: licensed · 授权专业软件
提案难度: 3 / 5

建议验证方式

Grader: profile line within 2 px of the marked row and perpendicular within 3 deg; fitted 10-90% width within 3% of truth. Grader opens the .pxp in Igor; Igor's command line and procedure windows are disabled for the agent, so user procedure code must be empty and the history must contain only dialog-generated commands.

建议部分得分

40% profile placement; 60% width.

R08.01.01.04-T15 Repeat the decay fit with lmfit (control pair of T02)

原始指令

Control pair of T02: fit fixtures/decay.csv with lmfit using the same model y = A*exp(-t/tau) + y0 and 1/y_err^2 weights, and write parameters, standard errors and reduced chi-square to output/decay_cli.json.

平台: mac · macOS win · Windows lin · Linux
应用: Python · lmfit
交互表面: term · 终端
GUI 需求 · 任务设定: CL · CLI 足够
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: code · 代码与命令
工作产物: WP07 · 仿真结果
条件: 未声明
提案难度: 3 / 5

建议验证方式

Control pair of T02: parameters within 0.5% and errors within 5% of reference.

建议部分得分

60% parameters; 40% errors and chi-square.

R08.01.01.04-T16 Batch-process twenty spectra with an Origin analysis template

原始指令

In OriginPro, build an analysis template from one file of fixtures/spectra/ (baseline subtraction + Gaussian fit of the main peak), then use Batch Processing to apply it to all 20 files and produce a summary sheet with center, FWHM and area per file. Save output/batch.opju.

平台: win · Windows
应用: OriginPro
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: HY · 混合
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 type · 文字与表单
工作产物: WP02 · 记录 / 表格
条件: licensed · 授权专业软件
提案难度: 4 / 5

建议验证方式

Grader reads the summary sheet: 20 rows; centers within 0.2%, FWHM within 2%, areas within 2% of reference per file. Code Builder, Python console and COM are disabled; grader opens the .opju with its own originpro session and checks the fit operations.

建议部分得分

25% template built; 25% batch run complete; 50% summary values.

R08.01.01.04-T17 Fit signal across categories simultaneously and produce pull plots

原始指令

With RooFit, fit fixtures/categories.root containing 3 categories with RooSimultaneous: shared signal mean and width, category-specific yields and backgrounds. Report all parameters, and make output/pulls.pdf with per-category fits and pulls; run 200 toys to check bias of the signal yield.

平台: mac · macOS win · Windows lin · Linux
应用: ROOT · RooFit
交互表面: term · 终端 desk · 桌面 GUI
GUI 需求 · 任务设定: HY · 混合
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: code · 代码与命令 vis · 视觉判断
工作产物: WP07 · 仿真结果
条件: long · 长流程
提案难度: 5 / 5

建议验证方式

Grader reruns the reference: shared parameters within 1%, yields within 2%; toy pull mean within 0.1 and width within 0.1 of reference.

建议部分得分

30% model; 40% fit results; 30% toy study.

R08.01.01.04-T18 Define a custom fit function in Origin's Function Builder

原始指令

In OriginPro, use the Fitting Function Builder to create 'ArrheniusOffset' (k = A*exp(-Ea/(R*T)) + c, R fixed) with parameter initial guesses, then fit fixtures/rates.csv with it and report Ea (kJ/mol) and A with errors. Save output/arrhenius.opju and the .fdf.

平台: win · Windows
应用: OriginPro
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G2 · GUI 必要
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: click · 指向与点击 type · 文字与表单
工作产物: WP07 · 仿真结果
条件: licensed · 授权专业软件
提案难度: 4 / 5

建议验证方式

Grader: .fdf defines the function with R fixed; fit uses it; Ea within 0.5% and A within 2% of reference. Code Builder, Python console and COM are disabled; grader opens the .opju with its own originpro session and checks the fit operations.

建议部分得分

35% function definition; 15% initial guesses; 50% fitted parameters.

R08.01.01.04-T19 Digitize data from a scanned plot and refit it

原始指令

Use the OriginPro Digitizer to extract the 25 data points of curve B from the scanned figure input/old_paper_fig3.png (set axes from tick labels, log y), then fit the reported model y = a*x/(b+x) and compare with the paper's values in output/digitized.json.

平台: win · Windows
应用: OriginPro
交互表面: desk · 桌面 GUI
GUI 需求 · 任务设定: G2 · GUI 必要
GUI 需求 · 普通权限: G2 · GUI 必要
交互原语: click · 指向与点击 geom · 精确几何 vis · 视觉判断
工作产物: WP02 · 记录 / 表格
条件: licensed · 授权专业软件
提案难度: 5 / 5

建议验证方式

Grader compares digitized points with the true data used to render the image: 25 points within 1% of axis span; fitted a and b within 3%. Code Builder, Python console and COM are disabled; grader opens the .opju with its own originpro session and checks the fit operations.

建议部分得分

20% axis calibration; 50% points accuracy; 30% fit.

R08.01.01.04-T20 Report a non-identifiable fit instead of quoting parameters

原始指令

Fit fixtures/two_exp.csv with the requested model y = A1*exp(-t/t1) + A2*exp(-t/t2) in any tool. If parameters are not identifiable from these data (check correlations/uncertainties), say so in output/fit_report.md with the evidence and propose what data would resolve it; do not report point values as reliable.

平台: mac · macOS win · Windows lin · Linux
应用: OriginPro · Python
交互表面: desk · 桌面 GUI term · 终端
GUI 需求 · 任务设定: HY · 混合
GUI 需求 · 普通权限: CL · CLI 足够
交互原语: code · 代码与命令 vis · 视觉判断
工作产物: WP12 · 答案 / 决策
条件: clarify · 需要澄清
提案难度: 3 / 5

建议验证方式

Data are generated so t1 and t2 are degenerate. Grader: report states non-identifiability, cites a correlation >0.95 or unbounded errors (numeric check), and proposes a longer time range or higher SNR (keyword rubric).

建议部分得分

50% non-identifiability stated with numeric evidence; 30% no false confident values; 20% sensible proposal.

已有研究映射

当前映射未给此小类指定基准参考。

数据绘图与曲线拟合

任务提案 · 20

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

原始指令

建议验证方式

建议部分得分

已有研究映射

同工作流族的小类